TDS5000B Online Programmer Guide
-- 8 2 9 --
WFMOutpre:YMUlt?
Description
This query--only command returns the vertical scale factor per digitiz-
ing level in units specified by WFMOutpre:YUNit for the waveform
specified by the DATa:SOUrce command. For those formats in which
WFMOutpre:BYT_Nr is important (all nonfloating point formats),
WFMOutpre:YMUlt? must take the location of the binary point implied
by BYT_NR into consideration.
An error is reported if the DATa:SOUrce waveform does not exist.
Group
Waveform Transfer
Related Commands
DATa:SOUrce
Syntax
WFMOutpre:YMUlt?
Example
WFMOutpre:YMUlt?
This query might return
:WFMOUTPRE:YMULT 4.0000E-3
indicating that the vertical scale for the corresponding waveform is 100
mV/div.
To Next Page
Loading...
Need help?
General
