Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 1 8 1 --
DATa
Description
This command sets or queries the format and location of the waveform
data that is transferred with the CURVe command.
Group
Waveform Transfer
Related Commands
CURVe, DATa:STARt, DATa:STOP, DATa:ENCdg SAVe:WAVEform,
SAVe:WAVEform:FILEFormat, WFMInpre:NR_FR?,
WFMInpre:NR_Pt, WFMOutpre:NR_FR?, WFMOutpre:NR_Pt?
Syntax 1
DATa {INIT|SNAp}
Syntax 2
DATa?
Argument
H INIT
This initializes the waveform data parameters to their factory defaults.
H SNAp
This sets DATa:STARt and DATa:STOP to match the current V Bar/
Paired/Split cursor positions.
Example 1
DATa?
This query might return
:DATA:DESTINATION REF1:ENCDG RIBINARY;SOURCE
CH1;START 1;STOP 500
Example 2
DATa INIT
This command initializes the waveform data parameters to their factory
defaults.