Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 7 8 4 --
TRIGger:B:EVENTS:COUNt
Description
This command sets or queries the number of events that must occur
before the B trigger (when TRIG:DELay:BY is set to EVENTS). This
command is equivalent to selecting B Event (Delayed) Trigger Setup
from the Trig menu, selecting the A→B Seq tab, choosing Trig on nth
event, and setting the desired Trig Event value.
Group
Trigger
Related Commands
TRIGger:B:EVENTS?
Syntax 1
TRIGger:B:EVENTS:COUNt <NR1>
Syntax 2
TRIGger:B:EVENTS:COUNt?
Argument
H <NR1>
This is the number of B trigger events, which can range from 1 to
10,000,000.
Example 1
TRIGger:B:EVENTS:COUNt?
This query might return
:TRIGGER:B:EVENTS:COUNT 2
indicating that two events must occur after the A trigger before the B
trigger can occur.
Example 2
TRIGger:B:EVENTS:COUNt 4
This command specifies that the B trigger will occur four trigger events
after the A trigger.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English