Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 4 0 9 --
MASK:AUTOSet:STANdard
(TDS5000B Series Option SM)
Description
This command selects the standard mask in autoset.
This command, like all the MASK:AUTOSET commands, affects only
an autoset on a standard mask, not the general oscilloscope autoset
function.
Group
Mask
Syntax 1
MASK:AUTOSet:STANdard {G703D1|E1Symmetri-
cal|E1Coax
|DS2RATESymmetrical|DS2RATE-
Coax|E2|RATE32Mbit|E3
|G703DS3|RATE97Mbit|E4_0|E4_1|STM1E_0|STM1E_1|
DS1
|DS1A|DS1C|DS2|DS3|DS4NA|DS4NA_Max|STS1Pulse
|STS1Eye|STS3|STS3_Max|ENET100STP|ENET100UTP
|ENET1250|FC133|FC266|FC531|FC1063|FC1063Draft
|FC2125|FC133E|FC266E|FC531E|FC1063E|FC1063E_N
BT
|FC1063E_NDT|FC1063E_NGT|FC1063E_ABT|FC1063E_A
DT
|FC1063E_AGT|FC1063E_ABR|FC1063E_ADR|FC1063E_A
GR
|FC2125E_NBT|FC2125E_NDT|FC2125E_NGT|FC2125E_A
BT
|FC2125E_ADT|FC2125E_AGT|FC2125E_ABR|FC2125E_A
DR
|FC2125E_AGR|OC1|OC3|OC12|OC48|OC48_FEC|INF2_5
G
|INF2_5GE|ATATXG1|ATATXG2|ATATXG3|ATARXG1|ATAR
XG2
|ATARXG3|FST1|FST2|FST3|FST4|FST5|FST6|HST1|HS
T2
|HST3|HST4|HST5|HST6|FW1394BS400BT1|FW1394BS40
0BT2
|FW1394BS800BT1|FW1394BS800BT2|FW1394BS1600BT1
|FW1394BS1600BT2|FW1394BS400B|FW1394BS800B
|FW1394BS1600B|USERMask|ENET1000BCX_NTP2
|ENET1000BCX_ATP2|ENET1000BCX_ATP3|ENET-
XAUI_Near
|ENET-
XAUI_Far|RIO_DRV500M|RIO_DRV750M|RIO_DRV1G
|RIO_DRV1_5G|RIO_DRV2G|RIO_EDRV500M|RIO_EDRV75
0M
|RIO_EDRV1G|RIO_EDRV1_5G|RIO_EDRV2G