TDS5000B Online Programmer Guide
-- 3 9 6 --
LIMit:TEMPLate:TOLerance:HORizontal
Description
This command sets or queries the amount, in units of horizontal divi-
sions, by which the source waveform is varied horizontally when creat-
ing the destination waveform.
Group
Limit Test
Related Commands
Syntax 1
LIMit:TEMPLate:TOLerance:HORizontal <toler-
ance>
Syntax 2
LIMit:TEMPLate:TOLerance:HORizontal?
Argument
H <tolerance>
This argument is the amount, in horizontal divisions, by which the
current source waveform is allowed to deviate from the template wa-
veform without exceeding the limits set in the limit test. The range is
0 to 5 divisions. The format is floating point with exponent.
Example 1
LIMit:TEMPLate:TOLerance:HORizontal 1.0
This command specifies that the current waveform is close enough to
the template waveform if it is within ±1.0 horizontal division.
Example 2
LIMit:TEMPLate:TOLerance:HORizontal?
This query might return:
:LIMit:TEMPLate:TOLerance:HORizontal 2.0
This indicates that the current waveform is close enough to the template
waveform if it is within ±2.0 horizontal divisions.
To Next Page
Loading...
Need help?
General
