Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 3 3 5 --
HORizontal:FASTframe:MULtipleframes:
FRAMESTart:<wfm>
Description
This command sets or queries the start frame number on the specified
waveform for the FastFrame multiple frames feature. Valid waveforms
include CH<x>, MATH<x>, and REF<x>. The value of x can be an
integer ranging from 1 through 4 in four--channel instruments and 1
through 2 in two--channel instruments. The multiple frames feature sup-
ports displaying multiple frames in an overlaid manner.
Group
Horizontal
Related Commands
HORizontal:FASTframe:MULtipleframes:NUMFRames:<wfm>
<NR1>,
HORizontal:FASTframe:MULtipleframes:MODe,
HORizontal:FASTframe:COUNt
Syntax 1
HORizontal:FASTframe:MULtipleframes:FRAMES-
Tart:<wfm> <NR1>
Syntax 2
HORizontal:FASTframe:MULtipleframes:FRAMES-
Tart:<wfm>?
Argument
H <NR1>
This specifies the start frame number on the specified waveform.
Example 1
HORIZONTAL:FASTFRAME:MULTIPLEFRAMES:FRAMES-
TART:CH1 3
This command sets the start frame number to frame 3 on channel 1.
Example 2
HORIZONTAL:FASTFRAME:MULTIPLEFRAMES:FRAMES-
TART?
This query might return
:HORIZONTAL:FASTFRAME:MULTIFRAMES:FRAMES-
TART:CH1 3
This indicates that the start frame number is frame 3 for channel 1.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English