Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 5 8 0 --
MEASUrement:MEAS<x>:REFLevel:PERCent:MID2
Description
This command sets or queries the percentage (where 100% is equal to
HIGH) used to calculate the mid reference level for the second wave-
form specified when MEASUrement:MEAS<x>:REFLevel:METHod is
set to Percent. Measurements are specified by x, which ranges from 1
through 8.
Note: This command affects the results of delay measurements.
Group
Measurement
Related Commands
MEASUrement:MEAS<x>:REFLevel:METHod
Syntax 1
MEASUrement:MEAS<x>:REFLevel:PERCent:MID2
<NR3>
Syntax 2
MEASUrement:MEAS<x>:REFLevel:PERCent:MID2?
Arguments
H <NR3>
This is the mid reference level, ranging from 0 to 100%. The default
mid reference level is 50%.
Example 1
MEASUREMENT:MEAS1:REFLEVEL:PERCENT:MID2 40
This command sets the mid2 reference level to 40% of HIGH.
Example 2
MEASUREMENT:MEAS1:REFLEVEL:PERCENT:MID2?
This query might return
:MEASUREMENT:MEAS1:REFLEVEL:PERCENT:MID2 45
indicating that the percentage mid2 reference level is set to 45% of
HIGH.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English