Tektronix TDS5000B Series - Page 911

TDS5000B Online Programmer Guide
-- 8 9 1 --
TRIGGER:A:VIDEO:HOLDOFF:FIELD 0.0000
TRIGGER:A:VIDEO:LINE 1
TRIGGER:A:VIDEO:POLARITY NORMAL
TRIGGER:A:VIDEO:SCAN RATE1
TRIGGER:A:VIDEO:SOURCE CH1
TRIGGER:A:VIDEO:STANDARD NTSC
TRIGGER:B:BY EVENTS
TRIGGER:B:EDGE:COUPLING DC
TRIGGER:B:EDGE:SLOPE RISE
TRIGGER:B:EDGE:SOURCE CH1
TRIGGER:B:EVENTS:COUNT 2
TRIGGER:B:LEVEL 0.0000
TRIGGER:B:STATE 0
TRIGGER:B:TIME 16.0000E-9
TRIGGER:B:TYPE EDGE
Vertical Default Values
The following table lists the Vertical factory default setup values.
Command Default Values
CH<1-4>:BANDWIDTH 500.0000E+6
CH<1-4>:COUPLING DC
CH<1-4>:DESKEW 0.0000
CH<1-4>:INVERT 0
CH<1-4>:LABEL:NAME ””
CH<1-4>:LABEL:XPOS 1.0000
CH<1-4>:LABEL:YPOS <1> 2.2000
<2> 1.8000
<3> 1.4000
<4> 1.000
CH<1-4>:OFFSET 0.0000
CH<1-4>:POSITION 0.0000
CH<1-4>:PROBEFUNC:EXTATTEN 1.0000