2-96 Service Manual
5058-030
10
Check the media transport/MPF
drive motor assembly for proper
operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch MPF feed/lift motor
(pick).
5. Touch MPF feed/lift motor
(feed) Test.
Does the above component
operate properly?
Go to step 12. Go to step 11.
11
Check the media transport/MPF
drive motor assembly for proper
connection.
Is the above component
properly connected?
Replace the media transport/MPF
drive motor.
Go to “Media transport/MPF
drive motor removal” on
page 4-118.
Replace the connection.
12
Check the registration clutch for
proper operation.
When performing
motor tests, ensure
that all cover and
door interlock
switches are
overridden.
1. Enter the Diagnostics Menu.
2. Touch MOTOR TESTS.
3. Touch PRINTER MOTOR
TESTS.
4. Touch Registration clutch.
Does the above component
operate properly?
Go to step 14. Go to step 13.
13
Check the registration clutch for
proper connection.
Is the above component
properly connected?
Replace the registration transport
roller .
Go to “Registration/transport
roller assembly removal” on
page 4-143.
Replace the connection.
14
Perform a print test. Go to
“PRINT TESTS” on page 3-22.
Does the error continue?
Replace the upper printer engine
PCBA.
Go to “Upper printer engine
PCBA removal” on page 4-181.
Problem resolved
Step Action and questions Yes No
To Next Page
Loading...
Need help?
General
