2-22 Service Manual
5058-030
203.03
Paper jam
Sensor (upper redrive) late jam The media is late reaching the sensor
(upper redrive) within the specified time
after reaching the sensor (fuser exit).
Go to “203.03 Sensor (upper redrive)
late jam” on page 2-99.
203.05
Paper jam
Sensor (upper redrive) lag jam The media reached the sensor (upper
redrive) but did not clear it within the
specified time.
Go to “203.05 Sensor (upper redrive) lag
jam” on page 2-101.
230.01
Paper jam
Sensor (duplex wait) static jam. Media remains detected by the sensor
(duplex wait) after power on.
Go to “230.01 Sensor (duplex wait)
static jam” on page 2-103.
231.03
Paper jam
Sensor (duplex wait) late jam The media is late reaching the sensor
(duplex wait) within the specified time after
the upper redrive motor has turned on for
duplexing.
Go to “231.03 Sensor (duplex wait) late
jam” on page 2-103.
232.03
Paper jam
Sensor (registration) late jam (Duplex
direct)
The media is late reaching the sensor
(registration) within the specified time after
the registration clutch has turned on for
duplex direct mode.
Go to “232.03 Sensor (registration) late
jam (duplex direct)” on page 2-106.
242.01
Paper jam
Sensor (tray 2 feed out) static jam Media remains detected by the sensor
(tray 2 feed out) after power on.
Go to “242.01 Sensor (tray 2 feed out)
static jam” on page 2-107.
242.03
Paper jam
Sensor (tray 2 feed out) late jam The media is late reaching the sensor (tray
2 feed out) within the specified time after
the feed from tray 3 or tray 4 has started.
Go to “242.03/242.06 Sensor (tray 2 feed
out) late jam” on page 2-108.
242.06
Paper jam
Sensor (tray 2 feed out) failed to pick
jam
The media is late reaching the sensor (tray
2 feed out) within the specified time after
the feed from tray 3 or tray 4 has started.
Go to “242.03/242.06 Sensor (tray 2 feed
out) late jam” on page 2-108.
242.56
Paper jam
Sensor (tray 2 feed out) late jam
80K interval for feed rollers exceeded
in tray 2.
The media is late reaching the sensor (tray
2 feed out) within the specified time after
the feed from tray 2 has started.
Go to “242.56 Sensor (tray 2 feed out)
late jam (80K interval exceeded for feed
rolls)” on page 2-109.
243.01
Paper jam
Sensor (tray 3 feed out) static jam Media remains detected by the sensor
(tray 3 feed out) after power on.
Go to “243.01 Sensor (tray 3 feed out)
static jam” on page 2-110.
2xx service error codes
Error code Description Action
To Next Page
Loading...
