Lexmark C950 - Page 71

Diagnostic information 2-23
5058-030
Go Back
Previous
Next
243.03
Paper jam
Sensor (tray 3 feed out) late jam The media is late reaching the sensor (tray
3 feed out) within the specified time after
the feed from tray 4 has started.
Go to “243.03/243.06 Sensor (tray 3 feed
out) late jam” on page 2-111.
243.06
Paper jam
Sensor (tray 3 feed out) failed to pick
jam
The media is late reaching the sensor (tray
3 feed out) within the specified time after
the feed from tray 4 has started.
Go to “243.03/243.06 Sensor (tray 3 feed
out) late jam” on page 2-111.
243.56
Paper jam
Sensor (tray 3 feed out) late jam
80K interval for feed rollers exceeded
in tray 3.
The media is late reaching the sensor (tray
3 feed out) within the specified time after
the feed from tray 4 has started.
Go to “243.56 Sensor (tray 3 feed out)
late jam (80K interval exceeded for feed
rolls)” on page 2-113.
244.01
Paper jam
Sensor (tray 4 feed out) static jam Media remains detected by the sensor
(tray 4 feed out) after power on.
Go to “244.01 Sensor (tray 4 feed out)
static jam” on page 2-114.
244.06
Paper jam
Sensor (tray 4 feed out) failed to pick
jam
The media is late reaching the sensor (tray
4 feed out) within the specified time after
the feed from 4 has started.
Go to “244.06 Sensor (tray 4 feed out)
late jam” on page 2-115.
244.56
Paper jam
Sensor (tray 4 feed out) late jam
80K interval for feed rollers exceeded
in tray 3.
The media is late reaching the sensor (tray
4 feed out) within the specified time after
the feed from tray 4 has started.
Go to “244.56 Sensor (tray 4 feed out)
late jam (80K interval exceeded for feed
rolls)” on page 2-117.
245.01
Paper jam
Sensor (tray 5 feed out) static jam Media remains detected by the sensor
(tray 5 feed out) after power on.
Go to “245.01 Sensor (tray 5 feed out)
static jam” on page 2-119.
245.03
Paper jam
Sensor (tray 5 feed out) late jam The media is late reaching the sensor (tray
5 feed out) within the specified time.
Go to “245.03 Sensor (tray 5 feed out)
late jam” on page 2-120.
245.06
Paper jam
Sensor (tray 5 feed out) lag jam The media reached the sensor (tray 5 feed
out) but did not clear it within the specified
time.
Go to “245.06 Sensor (tray 5 feed out)
lag jam” on page 2-121.
245.56
Paper jam
Sensor (tray 5 feed out) late jam
80K interval for feed rollers exceeded
in tray 5.
The media is late reaching the sensor (tray
5 feed out) within the specified time.
Go to “245.56 Sensor (HCF feed out)
late jam” on page 2-124.
2xx service error codes
Error code Description Action