EasyManuals Logo

Lexmark C950 Service Manual

Lexmark C950
1014 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
2-32 Service Manual
5058-030
Go Back
Previous
Next
910.03
Service data error
Data communication error Firmware upgrade is needed.
Go to “910.02–910.07 Data
communication error” on page 2-214.
910.04
Service data error
Data communication error Firmware upgrade is needed.
Go to “910.02–910.07 Data
communication error” on page 2-214.
910.05
Service data error
Data communication error Firmware upgrade is needed.
Go to “910.02–910.07 Data
communication error” on page 2-214.
910.06
Service data error
Data communication error Firmware upgrade is needed.
Go to “910.02–910.07 Data
communication error” on page 2-214.
910.07
Service data error
Data communication error Firmware upgrade is needed.
Go to “910.02–910.07 Data
communication error” on page 2-214.
940.02
Service data error
Clock signal communication error The clock signal failed to reach the upper
printer PCBA.
Go to “940.02 Clock signal
communication error” on page 2-215.
940.03
Service data error
Controller communication failure A software control-related error has
occurred.
Go to “940.03 Controller communication
failure” on page 2-215.
939.00
Service RIP engine
Comm.
RIP card assembly communication
failure
A communication error occurred between
the printer engine card and the RIP card
assembly.
Go to “939.00 RIP card assembly
communication failure” on page 2-214.
940.04
Service data error
IM logic failure A software control-related error has
occurred.
Go to “940.04 IM logic failure” on
page 2-215.
951.xx
Service NVRAM
failure
RIP card assembly NVRAM failure A failure has occurred in the RIP card
assembly NVRAM.
Go to “951.xx RIP card assembly
NVRAM failure” on page 2-216.
953.xx
Service NVRAM
failure
Operator panel assembly NVRAM
failure
NVRAM chip failure with operator panel
assembly (mirror).
Go to “953.xx Operator panel assembly
NVRAM failure” on page 2-216
.
955.xx
Service Code CRC
error
RIP card assembly NAND CRC failure The code ROM or NAND flash failed the
cyclic redundancy check.
Go to “955.xx RIP card assembly NAND
CRC failure” on page 2-216.
9xx service error codes
Error code Description Action

Table of Contents

Other manuals for Lexmark C950

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark C950 and is the answer not in the manual?

Lexmark C950 Specifications

General IconGeneral
Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Processor Speed1.2 GHz
ConnectivityEthernet, USB
Print TechnologyLaser
Print Speed50 ppm
Monthly Duty Cycle300000 pages
Recommended Monthly Page Volume5, 000 - 33, 000 pages
Memory1024 MB
Hard DriveOptional
Output Capacity500 sheets
InterfaceUSB 2.0
Media TypePlain paper, Card stock, Labels, Envelopes, Transparencies
Total Media Capacity5140 sheets
Media SizesLetter, Legal, A4, A5, Executive, Folio, Statement
Operating Systems SupportedWindows, Mac, Linux

Related product manuals