Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 1 8 --
H Waveform Cursors. Consists of two cursors you can independent-
ly assign to a waveform. These cursors provide the same readouts
that the vertical and horizontal bar cursors provide. Waveform
cursors enable you to conveniently measure waveform amplitude
and time. In XY or XYZ format, waveform cursors indicate the
amplitude position of an XY pair (Ch1 vs Ch2 voltage, where Ch1
is the X axis and Ch2 is the Y axis) relative to the trigger.
H Screen Cursors. Consists of two pairs of independent horizontal
and vertical cursors. You can use these cursors to indicate an
arbitrary position within the waveform display area. Screen
cursors, depending on the style selected, consist of the intersection
of a vertical and horizontal line, an X, or a vertical line with an X.
These cursors have no association with any waveform, other than
they inherit the color of the waveform they are assigned too.
Command Description
CURSor? Returns all cursor settings
CURSor:FUNCtion Sets or returns the cursor type
CURSor:HBArs? Returns hbar cursor settings
CURSor:HBArs:DELTa? Returns hbars cursors vertical differ-
ence
CURSor:HBArs:POSITION<x> Sets or returns the hbar cursor<x> verti-
cal position
CURSor:HBArs:UNIts? Returns hbar cursor units
CURSor:LINESTyle Sets or returns the cursor line style
CURSor:MODe Sets or returns whether cursors move in
unison or separately
CURSor:SCREEN:STYle Sets or returns the cursor type for
screen mode
CURSor:SOUrce<x> Sets or returns the source for cursor
<x>
CURSor:STATE Turns cursors on or off or returns their
state
CURSor:VBArs Sets or returns the position of vertical
bar cursors
CURSor:VBArs:DELTa? Returns the difference between vbar
cursors
CURSor:VBArs:POSITION<x> Sets or returns the vbar cursor<x> hori-
zontal position
CURSor:VBArs:UNIts Sets or returns the units for vbar cur-
sors
CURSor:WAVEform:HDELTA? Returns the horizontal difference be-
tween waveform cursors
CURSor:WAVEform:HPOS<x>? Returns the position of waveform cursor
<x>
CURSor:WAVEform:POSition<x> Sets or returns the position of waveform
cursor <x>
CURSor:WAVEform:SOUrce<x> Sets or returns the source for waveform
cursor <x>
CURSor:WAVEform:STYle Sets or returns the cursor type for wa-
veform mode
CURSor:WAVEform:UNIts Sets or returns the units for waveform
cursors

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English