Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 3 9 --
Command Description
MEASUrement:GATing Sets or returns the measurement
gating
MEASUrement:IMMed? Returns all immediate measure-
ment setup parameters
MEASUrement:IMMed:DElay? Returns information about the
immediate delay measurement
MEASUrement:IMMed:DELay:DIREction Sets or returns the search direc-
tion to use for immediate delay
measurements
MEASUrement:IMMed:DElay:EDGE[1] Sets or returns the slope of the
edge used for immediate delay
”from” waveform measurements
MEASUrement:IMMed:DElay:EDGE2 Sets or returns the slope of the
edge used for immediate delay
”to” waveform measurements
MEASUrement:IMMed:NOISe Sets or returns the location of
the noise measurement on the
eye waveform
MEASUrement:IMMed:REFLevel:
ABSolute:HIGH
Sets or returns the high refer-
ence level
MEASUrement:IMMed:REFLevel:
ABSolute:LOW
Sets or returns the low reference
level
MEASUrement:IMMed:REFLevel:
ABSolute:MID[1]
Sets or returns the middle refer-
ence level
MEASUrement:IMMed:REFLevel:
ABSolute:MID2
Sets or returns the middle refer-
ence level for delay measure-
ments
MEASUrement:IMMed:REFLevel:
METhod
Sets or returns the method used
to calculate measurements
MEASUrement:IMMed:REFLevel:
PERCent:HIGH
Sets or returns the top level for
rise time (90% level)
MEASUrement:IMMed:REFLevel:
PERCent:LOW
Sets or returns the low level for
rise time (10% level)
MEASUrement:IMMed:REFLevel:
PERCent:MID[1]
Sets or returns the mid level for
measurements
MEASUrement:IMMed:REFLevel:
PERCent:MID2
Sets or returns the mid level for
delay measurements
MEASUrement:IMMed:REFLevel? Returns the reference levels
MEASUrement:IMMed:SOURCE[1] Sets or returns the ”from” source
for all single channel immediate
measurements
MEASUrement:IMMed:SOURCE2 Sets or returns the source to
measure ”to” for phase or delay
immediate measurements
MEASurement:IMMed:SOUrce<x>:
SIGType
Sets or returns the type of input
signal used for the specified
measurement source
MEASUrement:IMMed:TYPe Sets or returns the type of the
immediate measurement
MEASUrement:IMMed:UNIts? Returns the units of the immedi-
ate measurement
MEASUrement:IMMed:VALue? Returns the value of the immedi-
ate measurement

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English