Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 4 0 --
MEASUrement:MEAS<x>:COUNt? Returns the number of values
accumulated since the last sta-
tistical reset
MEASUrement:MEAS<x>:DELay:
DIREction
Sets or returns the search direc-
tion to use for delay measure-
ments
MEASUrement:MEAS<x>:DELay:EDGE[1] Sets or returns the slope of the
edge to use for delay ”from” wa-
veform measurements
MEASUrement:MEAS<x>:DELay:EDGE2 Sets or returns the slope of the
edge to use for delay ”to” wave-
form measurements
MEASUrement:MEAS<x>:DELay? Returns the delay measurement
parameters for specified mea-
surement
MEASUrement:MEAS<x>:MAXimum? Returns the maximum value
found since the last statistical re-
set
MEASUrement:MEAS<x>:MEAN? Returns the mean value accu-
mulated since the last statistical
reset
MEASUrement:MEAS<x>:MINImum? Returns the minimum value
found since the last statistical re-
set
MEASURement:MEAS<x>:NOISe Sets or returns the location of
the noise measurement on the
eye waveform for MEAS<x>
MEASUrement:MEAS<x>:REFLevel:
ABSolute:HIGH
Sets or returns the top level for
rise time (90% level)
MEASUrement:MEAS<x>:REFLevel:
ABSolute:LOW
Sets or returns the low level for
rise time (10%)
MEASUrement:MEAS<x>:REFLevel:
ABSolute:MID[1]
Sets or returns the mid level for
measurements
MEASUrement:MEAS<x>:REFLevel:
ABSolute:MID2
Sets or returns the mid level for
delay measurements
MEASUrement:MEAS<x>:REFLevel:
METHod
Sets or returns the HIGH and
LOW levels to either % or units
MEASUrement:MEAS<x>:REFLevel:
PERCent:HIGH
Sets or returns the top level for
rise time (90% level)
MEASUrement:MEAS<x>:REFLevel:
PERCent:LOW
Sets or returns the low level for
rise time (10% level)
MEASUrement:MEAS<x>:REFLevel:
PERCent:MID[1]
Sets or returns the mid level for
measurements
MEASUrement:MEAS<x>:REFLevel:
PERCent:MID2
Sets or returns the mid level for
delay measurements
MEASUrement:MEAS<x>:REFLevel? Returns the reference levels
MEASUrement:MEAS<x>:SOURCE[1] Sets or returns the channel from
which measurements are taken
MEASUrement:MEAS<x>:SOURCE[2] Sets or returns the channel to
which measurements are sent
MEASurement:MEAS<x>:SOUrce<x>:
SIGType
Sets or returns the type of input
signal used for the specified
measurement source for the
specified measurement slot
MEASUrement:MEAS<x>:STATE Sets or returns whether the spe-
cified measurement slot is com-
puted and displayed

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English