TDS5000B Online Programmer Guide
-- 6 4 3 --
SET?
Description
This query--only command returns the commands that list the instru-
ment settings, except for configuration information for the calibration
values. You can use these commands to return the instrument to the
state it was in when you made the SET? query. This command is identi-
cal to the *LRN? command.
Group
Miscellaneous
Related Commands
HEADer, *LRN?, VERBose
Syntax
SET?
Note: The SET? query always returns command headers, regardless
of the setting of the HEADer command. This is because the returned
commands are intended to be sent back to the instrument as a com-
mand string. The VERBose command can still be used to specify
whether the returned headers should be abbreviated or full--length.
Example
SET?
This query might return the following response:
:ACQUIRE:STOPAFTER RUNSTOP;STATE 1;MODE SAM-
PLE;NUMENV 10;NUMAVG 16;REPET 1;:FASTACQ:STATE
0;:APPLICATION:GPKNOB1:ACTIVE 0;:APPLICA-
TION:GPKNOB2:ACTIVE 0;:APPLICATION:WIN-
DOW:HEIGHT 236;WIDTH 640;:APPLICATION:SCO-
PEAPP:STATE RUNNING;WINDOW
FULLSCREEN;:APPLICATION:EXTAPP:STATE NOTRUN-
NING;:AUXOUT:SOURCE ATRIGGER;EDGE FAL-
LING;:CMDBATCH 1;:HEADER 1;:LOCK
NONE;:ROSC:SOURCE INTERNAL;:VERBOSE
1;:ALIAS:STATE 0;:DISPLAY:CLOCK 1;COLOR:PAL-
ETTE NORMAL;MATHCOLOR DEFAULT;REFCOLOR DE-
FAULT;:DISPLAY:FILTER SINX;FORMAT YT;GRATICULE
FULL;INTENSITY:WAVEFORM 75.0000;AUTOBRIGHT
1;SCREENSAVER 1;SCREENSAVERDELAY 28800;:DIS-
PLAY:PERSISTENCE OFF;STYLE VECTORS;TRIGBAR
SHORT;TRIGT 1;VARPERSIST 500.0000E-3;:HARDCO-
PY:FILENAME ”untitled”;PORT FILE;:DIAG:LEVEL
SUBSYS;:SAVE:WAVEFORM:FILEFORMAT INTER-
NAL;:TRIGGER:A:MODE AUTO;TYPE EDGE;LEVEL
0.0000;HOLDOFF:BY DEFAULT;TIME
1.5000E-6;:TRIGGER:A:EDGE:SOURCE CH1;COUPLING
DC;SLOPE RISE;...
To Next Page
Loading...
Need help?
General
