TDS5000B Online Programmer Guide
-- 8 8 3 --
Limit Test Default Values
The following table lists the Limit Test factory default setup values.
Command Default Values
LIMIT:BEEP 0
LIMIT:COMPARE:<CH1-4> NONE
LIMIT:COMPARE:MATH<1-4> NONE
LIMIT:COMPARE:REF<1-4> NONE
LIMIT:EMAIL 0
LIMIT:HARDCOPY 0
LIMIT:HIGHLIGHTHITS 1
LIMIT:LOCK 1
LIMIT:LOG 0
LIMIT:SAVEWFM 0
LIMIT:SRQ 0
LIMIT:STATE 0
LIMIT:STOPONVIOLATION 0
LIMIT:TEMPLATE:TOLERANCE:HORIZONTAL 40.0000E-3
LIMIT:TEMPLATE:TOLERANCE:VERTICAL 40.0000E-3
Mask Default Values
The following table lists the Mask factory default setup values.
Command Default Values
MASK:AUTOADJUST 10
MASK:AUTOADJUST:HDELTA 10
MASK:AUTOADJUST:VDELTA 10
MASK:AUTOSET:AUTOADJUST 1
MASK:AUTOSET:HPOS 1
MASK:AUTOSET:HSCALE 1
MASK:AUTOSET:MODE MANUAL
MASK:AUTOSET:OFFSETADJ 1
MASK:AUTOSET:STANDARD NONE
MASK:AUTOSET:TRIGGER 1
To Next Page
Loading...
