TDS5000B Online Programmer Guide
-- 8 8 5 --
MASK:TEST:SAMPLE:THRESHOLD 1
MASK:TEST:SAVEWFM 0
MASK:TEST:SAVEWFM:FILENAME ”C:/TekScope/Waveforms/”
MASK:TEST:SRQ:COMPLETION 0
MASK:TEST:SRQ:FAILURE 0
MASK:TEST:STATE 0
MASK:TEST:STOP:FAILURE 0
MASK:TEST:THRESHOLD 1
MASK:TEST:WAVEFORM 20
MASK:USER:AMPLITUDE 100.0000E-3
MASK:USER:BITRATE 1544000
MASK:USER:HSCALE 200.0000E-9
MASK:USER:HTRIGPOS 500.0000E-3
MASK:USER:LABEL ”User Mask”
MASK:USER:PATTERNBITS 1
MASK:USER:PRESAMPBITS 0
MASK:USER:RECORDLENGTH 5000
MASK:USER:TRIGTOSAMP 0.0000
MASK:USER:VOFFSET 0.0000
MASK:USER:VPOS 0.0000
MASK:USER:VSCALE 1.0000E-3
MASK:USER:WIDTH 0.0000
Math Default Values
The following table lists the Math factory default setup values.
Command Default Values
MATH<1-4>:DEFINE ” ”
MATH<1-4>:LABEL:NAME ””
MATH<1-4>:LABEL:XPOS 1.0000
MATH<1-4>:LABEL:YPOS <1> 600.0000E-3
<2> 200.0000E-3
<3> -200.0000E-3
To Next Page
Loading...
