Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 8 9 3 --
Waveform Default Values
The following table lists the Waveform factory default setup values.
Command Default Values
DATA:DESTINATION REF1
DATA:ENCDG RIBINARY
DATA:FRAMESTART 1
DATA:FRAMESTOP 5000
DATA:SOURCE CH1
DATA:START 1
DATA:STOP 5000
Zoom Default Values
The following table lists the Zoom factory default setup values.
Command Default Values
ZOOM:GRATICULE:SIZE 80
ZOOM:GRATICULE:SPLIT EIGHTYTWENTY
ZOOM:MODE 0
ZOOM:SCROLL:DIRECTION STOP
ZOOM:SCROLL:LOCK 0
ZOOM:SCROLL:SPEED 1
ZOOM:ZOOM1:CH<1-4>:HORIZONTAL:POSITION 50.0000
ZOOM:ZOOM1:CH<1-4>:HORIZONTAL:SCALE 5
ZOOM:ZOOM1:CH<1-4>:VERTICAL:POSITION 0.0000
ZOOM:ZOOM1:CH<1-4>:VERTICAL:SCALE 1.0000
ZOOM:ZOOM1:MATH<1-4>:HORIZONTAL:POSITION 50.0000
ZOOM:ZOOM1:MATH<1-4>:HORIZONTAL:SCALE 5
ZOOM:ZOOM1:MATH<1-4>:VERTICAL:POSITION 0.0000
ZOOM:ZOOM1:MATH<1-4>:VERTICAL:SCALE 1.0000
ZOOM:ZOOM1:REF<1-4>:HORIZONTAL:POSITION 50.0000
ZOOM:ZOOM1:REF<1-4>:HORIZONTAL:SCALE 5
ZOOM:ZOOM1:REF<1-4>:VERTICAL:POSITION 0.0000
ZOOM:ZOOM1:REF<1-4>:VERTICAL:SCALE 1.0000

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English