Lexmark C950 - Page 74

2-26 Service Manual
5058-030
Go Back
Previous
Next
381.13
Service finisher error
Sensor (stacker bin upper limit) error The media level exceeds the height that is
allowed by the sensor (stacker upper limit).
Go to “381.13 Sensor (stacker bin upper
limit) error” on page 2-149.
381.14
Service finisher error
Sensor (stacker bin no media) error The media level doesn’t reach the height
that is allowed by the sensor (stacker bin
no media).
Go to “381.14 Sensor (stacker bin no
media) error” on page 2-151.
381.15
Service finisher error
Sensor (punch side reg 1) lag error
Sensor (punch side reg 2) lag error
The sensor (punch side reg 1) or (punch
side reg 2) activated, but did not clear
within the specified time.
Go to “381.15 Sensor (punch side reg 1/
2) lag jam” on page 2-153.
381.16
Service finisher error
Sensor (punch cam HP) late error The sensing area of the sensor (punch
cam HP) is not interrupted during the
specified time after the punch unit starts
moving to the home position.
Go to “381.16 Sensor (punch cam HP)
late jam” on page 2-155.
381.17
Service finisher error
Sensor (punch cam HP) lag error The sensor (punch cam HP) activated, but
did not clear within the specified time.
Go to “381.17 Sensor (punch cam HP)
lag jam” on page 2-156.
381.18
Service finisher error
Sensor (punch carriage shift HP) late
error
The sensor (punch carriage shift HP) didn’t
activate within the specified time.
Go to “381.18 Sensor (punch carriage
shift HP) late jam” on page 2-157.
381.19
Service finisher error
Sensor (punch carriage shift HP) lag
error
The sensor (punch carriage shift HP)
activated, but did not clear within the
specified time.
Go to “381.19 Sensor (punch carriage
shift HP) lag jam” on page 2-158.
381.20
Service finisher error
Sensor (punch cam HP) late error The sensing area of the sensor (punch
cam HP) is not interrupted during the
specified time after the punch unit starts
moving to the home position.
Go to “381.16 Sensor (punch cam HP)
late jam” on page 2-155.
381.21
Service finisher error
Sensor (punch cam HP) lag error The sensor (punch cam HP) activated, but
did not clear within the specified time.
Go to “381.17 Sensor (punch cam HP)
lag jam” on page 2-156.
3xx service errors
Error code Description Action