Lexmark C950 Service Manual

Diagnostic information 2-27
5058-030
Go Back
Previous
Next
381.22
Service finisher error
Sensor (punch carriage shift HP) late
error
The sensor (punch carriage shift HP) didn’t
activate within the specified time.
Go to “381.18 Sensor (punch carriage
shift HP) late jam” on page 2-157.
381.23
Service finisher error
Sensor (punch cam HP) lag error The sensor (punch cam HP) activated, but
did not clear within the specified time.
Go to “381.17 Sensor (punch cam HP)
lag jam” on page 2-156.
381.26
Service finisher error
Sensor (decurler cam HP) late error The sensor (decurler cam HP) didn’t
activate within the specified time.
Go to “381.26 Sensor (decurler cam HP)
late jam” on page 2-159.
381.27
Service finisher error
Sensor (decurler cam HP) lag error The sensor (decurler cam HP) activated,
but did not clear within the specified time.
Go to “381.27 Sensor (decurler cam HP)
lag jam” on page 2-160.
381.28
Service finisher error
Sensor (decurler cam HP) late error The sensor (decurler cam HP) didn’t
activate within the specified time.
Go to “381.26 Sensor (decurler cam HP)
late jam” on page 2-159.
381.29
Service finisher error
Sensor (decurler cam HP) lag error The sensor (decurler cam HP) activated,
but did not clear within the specified time.
Go to “381.27 Sensor (decurler cam HP)
lag jam” on page 2-160.
381.30
Service finisher error
Sensor (booklet front tamper HP) late
error
The sensor (booklet front tamper HP)
didn’t activate within the specified time.
Go to “381.30 Sensor (booklet front
tamper HP) late jam” on page 2-161.
381.31
Service finisher error
Sensor (booklet front tamper HP) lag
error
The sensor (booklet front tamper HP)
activated, but did not clear within the
specified time.
Go to “381.31 Sensor (booklet front
tamper HP) lag jam” on page 2-163.
381.32
Service finisher error
Sensor (booklet end guide HP) lag
error
The sensor (booklet end guide HP)
activated, but did not clear within the
specified time.
Go to “381.32 Sensor (booklet end
guide HP) lag jam” on page 2-164.
381.33
Service finisher error
Sensor (booklet rear tamper HP) late
error
The sensor (booklet rear tamper HP) didn’t
activate within the specified time.
Go to “381.33 Sensor (booklet rear
tamper HP) late jam” on page 2-166
.
3xx service errors
Error code Description Action

Lexmark C950 Specifications

General

Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Processor Speed	1.2 GHz
Connectivity	Ethernet, USB
Print Technology	Laser
Print Speed	50 ppm
Monthly Duty Cycle	300000 pages
Recommended Monthly Page Volume	5, 000 - 33, 000 pages
Memory	1024 MB
Hard Drive	Optional
Output Capacity	500 sheets
Interface	USB 2.0
Media Type	Plain paper, Card stock, Labels, Envelopes, Transparencies
Total Media Capacity	5140 sheets
Media Sizes	Letter, Legal, A4, A5, Executive, Folio, Statement
Operating Systems Supported	Windows, Mac, Linux