Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 3 3 --
Command
Description
MASK?
Returns the states of all settable mask
parameters
MASK:AUTOAdjust
Optimizes signal position within the
mask to minimize hits
MASK:AUTOAdjust:HDEL-
TA
Sets or returns how far autofit
searches horizontally
MASK:AUTOAdjust:VDEL-
TA
Sets or returns how far autofit
searches vertically
MASK:AUTOSet:AUTOAd-
just
Controls what happens at the end of a
mask autoset. If ON, the horz/vert auto
adjustment is run ONCE to potentially
improve the result of mask autoset
MASK:AUTOSet:HPOS
Controls whether the autoset algorithm
will attempt to change the horizontal
position of the signal while attempting
to autoset
MASK:AUTOSet:HSCAle
Controls whether the autoset algorithm
will attempt to change the horizontal
scale while attempting to autoset
MASK:AUTOSet:MODe
Controls whether or not an autoset will
be automatically done after a standard
mask is selected
MASK:AUTOSet:OFFSE-
TAdj
Sets autoset to not enforce the rule
that, for pulse standards, requires 0V
to be in a certain place in the mask.
Instead, autoset will attempt to mea-
sure the DC offset in the signal and
use scope offset or position controls to
compensate for the DC offset in the
signal
MASK:AUTOSet:STANdard
Selects the standard mask in autoset
MASK:AUTOSet:TRIGger
Controls if a MASK:AUTOSet affects
the trigger level
MASK:AUTOSet:VPOS
Controls whether the autoset algorithm
will affect the vertical position (or off-
set) of the signal while attempting to
autoset
MASK:AUTOSet:VSCAle
Controls whether the autoset algorithm
will attempt to change the vertical
scale while attempting to autoset
MASK:COPy:USER
Copies the currently displayed mask to
the User mask
MASK:COUNt:FAILURES?
Returns the number of pass/fail tests
that have failed
MASK:COUNt:HITS?
Returns the total number of mask hits
on all mask segments
MASK:COUNt RESET
Resets to zero the number of hits for
all mask segments on the specified
source
MASK:COUNt:SEG<m>:HI
TS?
Returns the number of hits in mask
segment <m>
MASK:COUNt:STATE
Sets or returns the mask hits count
state
MASK:COUNt:TESTS?
Returns the number of pass/fail tests
that have occurred

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English