Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 3 4 --
MASK:COUNt:TOTal?
Returns the sum of all hits in all mask
segments
MASK:COUNt:VIOLA-
TIONS?
Returns the number of test violations
that have occurred in the current pass/
fail test
MASK:COUNt:WAVE-
FORMS?
Returns the number of waveforms that
have been acquired and processed
during pass/fail testing
MASK:DISplay
Sets or returns whether or not defined
masks are displayed on the screen
MASK:FILTer
Sets or returns whether the selected
optical reference receiver mask filter is
enabled
MASK:HIGHLIGHTHits
Sets or returns whether or not hits in a
mask are highlighted in different colors
than other waveform data
MASK:INVert
Controls whether the mask is drawn
inverted
MASK:LOCk
Sets or returns the mask lock to wave-
form mode
MASK:MARgin:PERCent
Sets or queries the mask margin per-
centage
MASK:MARgin:STATE
Sets or returns the state of the mask
margins
MASK:MASKPRE:AMPli-
tude
Sets or returns the current mask’s
nominal pulse amplitude in volts.
MASK:MASKPRE:HSCAle
Sets or returns the nominal timing res-
olution used to draw the current mask,
in time/division
MASK:MASKPRE:HTRIG-
POS
Sets or returns the nominal tripper
position.(pulse leading edge) used to
draw the current mask as a fraction of
the display width
MASK:MASKPRE:PAT-
TERNBITS
Sets or returns the number of bits used
for serial trigger for the current mask
standard
MASK:MASKPRE:PRES-
AMPBITS
Sets or returns the number of bits be-
fore the (isolated one) pulse leading
edge in the serial trigger pass/fail test-
ing
MASK:MASKPRE:RE-
COrdlength
Sets or returns the nominal record
length for pulse mask testing
MASK:MASKPRE:SERIAL-
TRIG
Sets or returns the type of triggering
used in pass/fail testing of the current
mask
MASK:MASKPRE:TRIG-
TOSAMP
Sets or returns the time, in seconds,
from the (leading edge) trigger position
to the pulse bit sampling position
MASK:MASKPRE:VOFF-
Set
Sets or returns the nominal vertical off-
set, in volts, used to vertically offset the
input channels
MASK:MASKPRE:VPOS
Sets or returns the nominal vertical
position, in divisions, used to vertically
position the input channels
MASK:MASKPRE:VSCAle
Sets or returns the nominal vertical
scale, in volts per division, used to ver-
tically scale the input channels

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English