TDS5000B Online Programmer Guide
-- 4 6 --
TRIGger:A:EDGE:SLOpe Sets or returns the slope for
the A edge trigger
TRIGger:A:EDGE:SOUrce Sets or returns the source for
the A edge trigger
TRIGger:A:EDGE? Returns the source, coupling
and source for the A edge
trigger
TRIGger:A:HOLDoff:ACTUal? Returns the holdoff time ac-
tually used by the A trigger
TRIGger:A:HOLDoff:BY Sets or returns the type of
holdoff for the A trigger
TRIGger:A:HOLDoff:TIMe Sets or returns the A trigger
holdoff time
TRIGger:A:HOLDoff? Returns the A trigger holdoff
parameters
TRIGger:A:LEVel Sets or returns the level for
the A trigger
TRIGger:A:LOGIc:CLAss Sets or returns the type of A
trigger logic
TRIGger:A:LOGIc:FUNCtion Sets or returns the logical
combination of the input
channels for the A logic trig-
ger
TRIGger:A:LOGIc:INPut:CH<x> Specifies or returns the input
settings for the specified log-
ic trigger channel
TRIGger:A:LOGIc:INPut? Returns the A logic trigger in-
put for channels 1 --3.
TRIGger:A:LOGIc:PATtern:INPut:CH2 Sets or returns the A logic
trigger input for channel 2
TRIGger:A:LOGIc:PATtern:INPut:CH4 Sets or returns the A logic
trigger input for channel 4
TRIGger:A:LOGIc:PATtern:WHEn Sets or returns the condition
for generating the A logic
pattern trigger
TRIGger:A:LOGIc:PATtern:WHEn
:LESSLimit
Sets or returns the maximum
time that the selected pattern
may be true and still gener-
ate an A logic pattern trigger
TRIGger:A:LOGIc:PATtern:WHEn
:MORELimit
Sets or returns the minimum
time that the selected pattern
may be true and still gener-
ate an A logic pattern trigger
TRIGger:A:LOGIc:PATtern? Returns the conditions for
generating an A logic pattern
trigger
TRIGger:A:LOGIc:SETHold:CLOCk:EDGE Sets or returns the clock
edge polarity for setup and
hold triggering
TRIGger:A:LOGIc:SETHold:CLOCk:SOUrce Sets or returns the clock
source for the A logic trigger
setup and hold input
TRIGger:A:LOGIc:SETHold:CLOCk
:THReshold
Sets or returns the clock volt-
age threshold for setup and
hold trigger
TRIGger:A:LOGIc:SETHold:CLOCk? Returns clock edge polarity,
voltage threshold and source
input for setup/hold triggering