TDS5000B Online Programmer Guide
-- 4 7 --
TRIGger:A:LOGIc:SETHold:DATa:SOUrce Sets or returns the data
source for the setup and hold
trigger
TRIGger:A:LOGIc:SETHold:DATa
:THReshold
Sets or returns the data volt-
age threshold for setup and
hold trigger
TRIGger:A:LOGIc:SETHold:DATa? Returns the voltage thresh-
old and data source for the
setup/hold trigger
TRIGger:A:LOGIc:SETHold:HOLDTime Sets or returns the hold time
for the setup and hold viola-
tion triggering
TRIGger:A:LOGIc:SETHold:SETTime Sets or returns the setup
time for setup and hold viola-
tion triggering
TRIGger:A:LOGIc:SETHold? Returns clock edge polarity,
voltage threshold and
source; data voltage thresh-
old and source; and setup/
hold times for violation trig-
gering
TRIGger:A:LOGIc:STATE:INPut:CH2 Sets or returns the slope for
channel 2 of the A logic state
trigger
TRIGger:A:LOGIc:STATE:INPut:CH4 Sets or returns the slope for
channel 4 of the A logic state
trigger
TRIGger:A:LOGIc:STATE:WHEn Sets or returns the condition
for generating an A logic
state trigger
TRIGger:A:LOGIc:STATE? Returns the data input and
trigger criteria for the A logic
trigger
TRIGger:A:LOGIc:THReshold:CH<x> Sets or returns the A logic
trigger threshold voltage for
the specified channel
TRIGger:A:LOGIc:THReshold? Returns the threshold volt-
age for all channels in A log-
ic trigger
TRIGger:A:LOGIc? Returns all of the A trigger
logic parameters
TRIGger:A:MODe Sets or returns the A trigger
mode
TRIGger:A:PULse:CLAss Sets or returns the type of
pulse on which to trigger
TRIGger:A:PULse:GLItch:POLarity Sets or returns the polarity
for the A pulse glitch trigger
TRIGger:A:PULse:GLItch:TRIGIF Sets or returns the accep-
tance or rejection of pulse
glitch trigger, based on width.
TRIGger:A:PULse:GLItch:WIDth Sets or returns the width of
the A pulse glitch trigger
TRIGger:A:PULse:GLItch? Returns the current A glitch
pulse trigger parameters
TRIGger:A:PULse:RUNT:LOGIc:INPUT
:CH<x>
Sets or returns the input set-
ting for the logic condition
with runt for channel 1
through channel 4