Switching Commands
109
ProSAFE M7100 Managed Switches
DHCP Client Commands
DHCP Client can include vendor and configuration information in DHCP client requests relayed to
a DHCP server. This information is included in DHCP Option 60, Vendor Class Identifier. The
information is a string of 128 octets.
dhcp client vendor-id-option
Use this command to enable the inclusion of DHCP Option-60, Vendor Class Identifier included in
the requests transmitted to the DHCP server by the DHCP client operating in the switch.
no dhcp client vendor-id-option
Use this command to disable the inclusion of DHCP Option-60, Vendor Class Identifier included in
the reques
ts transmitted to the DHCP server by the DHCP client operating in the switch.
dhcp client vendor-id-option-string
Use this command to set the DHCP Vendor Option-60 string to be included in requests
transmitted to the DHCP server by the DHCP client operating in the switch.
no dhcp client vendor-id-option-string
Use this command to clear the DHCP Vendor Option-60 string.
show dhcp client vendor-id-option
Use this command to display the configured administration mode of the vendor-id-option and
the vendor-id string to be included in Option-43 in DHCP requests.
Format dhcp client vendor-id-option
Mode Global Config
Format no dhcp client vendor-id-option
Mode Global Config
Format dhcp client vendor-id-option-string <string>
Mode Global Config
Format no dhcp client vendor-id-option-string
Mode Global Config
Format show dhcp client vendor-id-option
Mode Privileged EXEC
To Next Page
Loading...
