Security Commands
340
ProSAFE M7100 Managed Switches
ipv6 dhcp snooping database write-delay
This command configures the interval in seconds at which the DHCPv6 snooping database is
persisted. The write delay value ranges from 15 to 86400 seconds.
no ipv6 dhcp snooping database write-delay
This command returns the write delay value for the DHCPv6 snooping database to the default
value of 300 seconds.
ipv6 dhcp snooping binding
This command configures a static DHCPv6 snooping binding entry in the DHCP snooping
database.
no ipv6 dhcp snooping binding
This command removes a static DHCPv6 entry from the DHCP snooping database.
ipv6 dhcp snooping trust
This command configures a port as a trusted port.
Default 300 seconds
Format ipv6 dhcp snooping database write-delay <seconds>
Mode Global config
Format no ipv6 dhcp snooping database write-delay
Mode Global config
Format ipv6 dhcp snooping binding <mac-address> vlan <vlan-id> <ipv6
address> interface <interface-id>
Mode Global config
Format no ipv6 dhcp snooping binding <mac-address>
Mode Global config
Default Disabled
Format ipv6 dhcp snooping trust
Mode Interface config
To Next Page
Loading...
Need help?
General