NETGEAR ProSAFE M7100-24X - Show Diffserv

Quality of Service (QoS) Commands
245
ProSAFE M7100 Managed Switches
If you do not specify the Class Name, this command displays a list of all defined DiffServ classes.
The following fields are displayed:
show diffserv
This command displays the DiffServ General Status Group information, which includes the
current administrative mode setting as well as the current and maximum number of rows in each
of the main DiffServ private MIB tables. This command takes no options.
Match Criteria The Match Criteria fields are only displayed if they have been configured. Not all platforms
support all match criteria values. They are displayed in the order entered by the user. The
fields are evaluated in accordance with the class type. The possible Match Criteria fields are:
Destination IP Address, Destination Layer 4 Port, Destination MAC Address, Ethertype,
Source MAC Address, VLAN, Class of Service, Every, IP DSCP, IP Precedence, IP TOS,
Protocol Keyword, Reference Class, Source IP Address, and Source Layer 4 Port.
Values The values of the Match Criteria.
Term Definition
Class Name The name of this class. (Note that the order in which classes are displayed is not necessarily
the same order in which the
y were created.)
Class Type A class type of ‘all’ means every match criterion defined for the class is evaluated
simultaneously and mus
t all be true to indicate a class match.
Reference Class
Name
The name of an existing DiffServ class whose match conditions are being referenced by the
specified class definition.
F
ormat show diffserv
Mode Privileged EXEC
Term Definition
DiffServ Admin mode The current value of the DiffServ administrative mode.
Class Table Size Current
/Max
The cur
rent number of entries (rows) and the maximum allowed entries (rows) in the
Class Table.
Class Rule Table Size
Cur
rent /Max
The current number of entries (rows) and the maximum allowed entries (rows) in the
Class Rule Table.
Policy Table Size Current
/Max
The cur
rent number of entries (rows) and the maximum allowed entries (rows) in the
Policy Table.
Policy Instance Table
Size C
urrent /Max
Current number of entries (rows) and the maximum allowed entries (rows) in the
Policy Instance Table.
Term Definition