NETGEAR ProSAFE M7100-24X - Logging Email Logtime; Logging Email From-Addr; Logging Email Message-Type Subject

Utility Commands
396
ProSAFE M7100 Managed Switches
logging email from-addr
This command configures the email address of the sender (the switch).
no logging email from-addr
This command removes the configured email source address.
logging email message-type subject
This command configures the subject line of the email for the specified type.
no logging email message-type subject
This command removes the configured email subject for the specified message type and restores
it to the default email subject.
logging email logtime
This command configures how frequently non-urgent email messages are sent. Non-urgent
messages are collected and sent in a batch email at the specified interval. The valid range is every
30- 1440 minutes.
Default switch@netgear.com
Format logging email from-addr <from-email-addr>
Mode Global Config
Format no logging email from-addr <from-email-addr>
Mode Global Config
Default For urgent messages: Urgent Log Messages
For non-urgent messages: Non-Urgent Log Messages
Format logging email message-type {urgent | non-urgent | both} subject
<subject>
Mode Global Config
Format no logging email message-type {urgent | non-urgent | both} subject
Mode Global Config
Default 30 minutes
Format logging email logtime <minutes>
Mode Global Config