Switching Commands
32
ProSAFE M7100 Managed Switches
no spanning-tree bpduflood
Use this command to disable BPDU Flood on the interface.
spanning-tree bpduguard
Use this command to enable BPDU Guard on the switch.
no spanning-tree bpduguard
Use this command to disable BPDU Guard on the switch.
spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple spanning
tree (MSTP) BPDUs. Use the <slot/port> parameter to transmit a BPDU from a specified
interface, or use the all keyword to transmit BPDUs from all interfaces. This command forces
the BPDU transmission when you execute it, so the command does not change the system
configuration or have a “no” version.
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration that
this switch is currently using. The <name> is a string of up to 32 characters.
Format no spanning-tree bpduflood
Mode Interface Config
Default disabled
Format spanning-tree bpduguard
Mode Global Config
Format no spanning-tree bpduguard
Mode Global Config
Format spanning-tree bpdumigrationcheck {<slot/port> | all}
Mode Global Config
Default base MAC address in hexadecimal notation
Format spanning-tree configuration name <name>
Mode Global Config
To Next Page
Loading...
Need help?
General