Utility Commands
466
ProSAFE M7100 Managed Switches
no debug udld packet transmit
This command enables debugging on the transmitted UDLD PDU’s.
debug vpc core
This command enables debug traces for VPC core functionality.
no debug vpc core
This command disables debug traces for VPC core functionality.
debug vpc peer-keepalive
This command enables debug traces for the VPC keep-alive state machine transitions.
no debug vpc peer-keepalive
This command disables debug traces for the VPC keep-alive state machine transitions.
debug vpc peer-link
This command enables debug traces for control messages or data messages that are exchanged
between MLAG devices on the MLAG peer link.
Format debug udld packet transmit
Mode Privileged EXEC
Format debug vpc core
Mode Privileged EXEC
Format no debug vpc core
Mode Privileged EXEC
Format debug vpc peer-keepalive
Mode Privileged EXEC
Format no debug vpc peer-keepalive
Mode Privileged EXEC
Format debug vpc peer-link {control-message | data-message}
Mode Privileged EXEC
To Next Page
Loading...
