NETGEAR ProSAFE M7100-24X - Set Mld Mrouter; Set Mld Mrouter Interface

Switching Commands
128
ProSAFE M7100 Managed Switches
no set mld mcrtexpiretime
Use this command to set the Multicast Router Present Expiration time to 0. The time is set for the
sy
stem, on a particular interface or a VLAN.
set mld mrouter
Use this command to configure the VLAN ID for the VLAN that has the multicast router attached
mode enabled.
no set mld mrouter
Use this command to disable multicast router attached mode for a VLAN with a particular VLAN
ID.
set mld mrouter interface
Use this command to configure the interface as a multicast router-attached interface. When
configured as a multicast router interface, the interface is treated as a multicast router-attached
interface in all VLANs.
no set mld mrouter interface
Use this command to disable the status of the interface as a statically configured multicast
rout
er-attached interface.
Format no set mld mcrtexpiretime <vlanid>
Mode • Global Config
• Interface Config
F
ormat set mld mrouter <vlanid>
Mode Interface Config
Format no set mld mrouter <vlanid>
Mode Interface Config
Default disabled
Format set mld mrouter interface
Mode Interface Config
Format no set mld mrouter interface
Mode Interface Config