Quality of Service (QoS) Commands
248
ProSAFE M7100 Managed Switches
show diffserv service brief
This command displays all interfaces in the system to which a DiffServ policy has been attached.
The inbound direction parameter is optional.
The following information is repeated for interface and direction (only those interfaces
configur
ed with an attached policy are shown):
Term Definition
DiffServ Admin
Mode
The current setting of the DiffServ administrative mode. An attached policy is only in effect
on an inter
face while DiffServ is in an enabled mode.
Interface Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service.
Operational
S
t
atus
The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direction.
Policy Details Attached policy details, whose content is identical to that described for the show policy-map
<polic
ymapname> c
ommand (content not repeated here for brevity).
Format show diffserv service brief [in | out]
Mode Privileged EXEC
Term Definition
DiffServ Admin
Mode
The current setting of the DiffServ administrative mode. An attached policy is only active on
an inter
face while DiffServ is in an enabled mode.
Term Definition
Interface Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service.
OperStatus The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direction.
To Next Page
Loading...
