NETGEAR ProSAFE M7100-24X - Service Dhcp; Ip Dhcp Bootp Automatic

Utility Commands
430
ProSAFE M7100 Managed Switches
no ip dhcp ping packets
This command prevents the server from pinging pool addresses and sets the number of packets
to 0.
service dhcp
This command enables the DHCP server.
no service dhcp
This command disables the DHCP server.
ip dhcp bootp automatic
This command enables the allocation of the addresses to the bootp client. The addresses are from
the automatic address pool.
no ip dhcp bootp automatic
This command disables the allocation of the addresses to the bootp client. The addresses are from
the automatic address pool.
Default 0
Format no ip dhcp ping packets
Mode Global Config
Default disabled
Format service dhcp
Mode Global Config
Format no service dhcp
Mode Global Config
Default disabled
Format ip dhcp bootp automatic
Mode Global Config
Format no ip dhcp bootp automatic
Mode Global Config