Switching Commands
114
ProSAFE M7100 Managed Switches
set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time. The time is set for the system,
on a particular interface or VLAN. This is the amount of time in seconds that a switch waits for a
query to be received on an interface before the interface is removed from the list of interfaces
with multicast routers attached. The range is 0–3600 seconds. A value of 0 indicates an infinite
time-out, that is, no expiration.
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the
s
y
stem, on a particular interface or a VLAN.
set igmp mrouter
This command configures the VLAN ID (<vlanId>) that has the multicast router mode enabled.
no set igmp mrouter
This command disables multicast router mode for a particular VLAN ID (<vlan_id>).
Default 0
Format set igmp mcrtrexpiretime <0-3600>
Mode • Global Config
• Interface Config
F
ormat set igmp mcrtrexpiretime <vlan_id> <0-3600>
Mode VLAN Config
Format no set igmp mcrtrexpiretime
Mode • Global C
onfig
• Interface Config
F
ormat no set igmp mcrtrexpiretime <vlan_id>
Mode VLAN Config
Format set igmp mrouter <vlan_id>
Mode Interface Config
Format no set igmp mrouter <vlan_id>
Mode Interface Config
To Next Page
Loading...
Need help?
General