Utility Commands
398
ProSAFE M7100 Managed Switches
show logging email statistics
This command displays email alerting statistics.
clear logging email statistics
This command resets the email alerting statistics.
Email Alert Urgent Severity
Level
The lowest severity level that is considered urgent. Messages of this type are sent
immediately.
Email Alert Non Urgent
Severit
y Level
The lowest severity level that is considered non-urgent. Messages of this type, up
to the urgent level, are collected and sent in a batch email. Log messages that are
less severe are not sent in an email message at all.
Email Alert Trap Severity
Le
v
el
The lowest severity level at which traps are logged.
Email Alert Notification
Period
The amount of time t
o wait between non-urgent messages.
Email Alert To Address
Table
The c
onfigured email recipients.
Email Alert Subject Table The subject lines included in urgent (Type 1) and non-urgent (Type 2) messages.
For Msg Type urgent,
subjec
t is
The c
onfigured email subject for sending urgent messages.
For Msg Type non-urgent,
subject is
The c
onfigured email subject for sending non-urgent messages.
Format show logging email statistics
Mode Privileged EXEC
Term Definition
Email Alert Operation
St
atus
The operational status of the email alerting feature.
No of Email Failures The number of email messages that have attempted to be sent but were
unsucc
essful.
No of Email Sent The number of email messages that were sent from the switch since the counter
was cle
ared.
Time Since Last Email Sent The amount of time that has passed since the last email was sent from the switch.
Format clear logging email statistics
Mode Privileged EXEC
Term Definition
To Next Page
Loading...
