NETGEAR ProSAFE M7100-24X - Show Sntp; Clock Summer-Time Date

Utility Commands
419
ProSAFE M7100 Managed Switches
clock summer-time date
Use the clock summer-time date command to set the summertime offset to UTC. If the optional
parameters are not specified, they are read as either '0' or '\0', as appropriate.
• date—Day of the month. (Range: 1-31)
• month—Month. (Range: The first thr
ee letters by name; jan, for example.)
• year—Year. (Range: 2000-2097)
• hh:mm—Time in 24-hour f
ormat in hours and minutes. (Range: hh: 0-23, mm: 0-59)
• offset—Number of minutes to add during the summertime. (Range:1-1440)
• acronym—The acronym for the time zone to be displayed when summertime is in effect.
(Range: Up t
o four characters)
Example:
(Switch)(config)# clock summer-time date 1 Apr 2007
02:00 28 Oct 2007 offset 90 zone EST
or
(Switch) (config)# clock summer-time date Apr 1 2007
02:00 Oct 28 2007 offset 90 zone EST
no clock summer-time
Use the no clock summer-time command to reset the summertime offset.
Example:
console(config)#no clock summer-time
show sntp
This command is used to display SNTP settings and status.
Format clock summer-time date <date> <month> <year> <hh:mm> <date>
<month> <year> <hh:mm> [offset <offset>] [zone <zone-acronym>]
Mode Global Config
Format no clock summer-time
Mode Global Config
Format show sntp
Mode Privileged EXEC