Security Commands
299
ProSAFE M7100 Managed Switches
show dot1x authentication-history
This command displays 802.1X authentication events and information during successful and
unsuccessful Dot1x authentication process for all interfaces or the specified interface. Use the
optional keywords to display only failure authentication events in summary or in detail.
show authentication methods
This command displays information about the authentication methods.
The following is an example of this command:
Login Authentication Method Lists
________________________________
Console_Default: None
Network_Default:Local
Enable Authentication Lists
_____________________
Console_Default: Enable None
Network_Default:Enable
Line Login Method List Enable Method Lists
_____________________
Console Console_Default Console_Default
Telnet Network_Default Network_Default
SSH Network_Default Network_Default
http : Local
Format show dot1x authentication-history {<slot/port> | all}
[failedauth-only] [detail]
Mode Privileged EXEC
Term Definition
Time Stamp The exact time at which the event occurs.
Interface Physical Port on which the event occurs.
Mac-Address The supplicant/client MAC address.
VLAN assigned The VLAN assigned to the client/port on authentication.
VLAN assigned
R
e
ason
The type of VLAN ID assigned, which can be Guest VLAN, Unauth, Default, RADIUS Assigned,
or Monitor Mode VLAN ID.
Auth Status The authentication status.
Reason The actual reason behind the successful or failed authentication.
Format show authentication methods
Mode Privileged EXEC
To Next Page
Loading...
