NETGEAR ProSAFE M7100-24X - Rmon Collection History; Show Rmon Alarm; Show Rmon Alarms; Show Rmon Hcalarms

Utility Commands
481
ProSAFE M7100 Managed Switches
rmon collection history
This command sets the history control parameters of the RMON historyControl MIB group.
no rmon collection history
This command deletes the history control group entry with the specified index number.
show rmon alarm
This command displays a specific entry in the RMON alarm table.
show rmon alarms
This command displays all entries in the RMON alarm table.
show rmon hcalarm
This command displays a specific entry in the RMON hcAlarmTable.
show rmon hcalarms
This command displays all entries in the RMON hcAlarmTable.
Format rmon collection history <index number> [buckets <1-65535>] [interval
<1-3600>] [owner <owner>]
Mode Interface Config
Format no rmon collection history <index number>
Mode Interface Config
Format show rmon alarm <alarm-index>
Mode Privileged Exec
Format show rmon alarms
Mode Privileged Exec
Format show rmon hcalarm <alarm index>}
Mode Privileged Exec
Format show rmon hcalarms
Mode Privileged Exec