Management Commands
513
ProSAFE M7100 Managed Switches
ip http session soft-timeout
Use this command to configure the soft timeout for unsecure HTTP sessions in minutes.
Configuring this value to zero will give an infinite soft-timeout. When this timeout expires the
user will be forced to reauthenticate. This timer begins on initiation of the Web session and is
restarted with each access to the switch.
no ip http session soft-timeout
Use this command to reset the soft timeout for unsecure HTTP sessions to the default value.
ip http secure-session maxsessions
Use this command to limit the number of secure HTTP sessions. Zero is the configurable
minimum.
no ip http secure-session maxsessions
Use this command to restore the number of allowable secure HTTP sessions to the default value.
ip http secure-session soft-timeout
Use this command to configure the soft timeout for secure HTTP sessions in minutes. Configuring
this value to zero will give an infinite soft-timeout. When this timeout expires, you are forced to
reauthenticate. This timer begins on initiation of the Web session and is restarted with each
access to the switch. The secure-session soft-timeout cannot be set to zero (infinite).
Default 5
Format ip http session soft-timeout <0-60>
Mode Privileged EXEC
Format no ip http session soft-timeout
Mode Privileged EXEC
Default 16
Format ip http secure-session maxsessions <0-16>
Mode Privileged EXEC
Format no ip http secure-session maxsessions
Mode Privileged EXEC
Default 5
Format ip http secure-session soft-timeout <1-60>
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General