NETGEAR ProSAFE M7100-24X - Chapter 6 IPv6 Commands

Security Commands
351
ProSAFE M7100 Managed Switches
show port-security dynamic
This command displays the dynamically locked MAC addresses for the port.
show port-security static
This command displays the statically locked MAC addresses for port.
show port-security violation
This command displays the source MAC address of the last packet discarded on a locked port.
Static Limit Maximum statically allocated MAC Addresses.
Violation Trap
Mode
Whether violation traps are enabled.
Format show port-security dynamic [lag <lag-intf-num> | <slot/port>]
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of dynamically locked MAC.
Format show port-security static [lag <lag-intf-num> | <slot/port>]
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of statically locked MAC.
Format show port-security violation [lag <lag-intf-num> | <slot/port>]
Mode Privileged EXEC
Term Definition
MAC Address MAC Address of discarded packet on locked port.
Term Definition