NETGEAR ProSAFE M7100-24X - Debug Debug-Config

Utility Commands
446
ProSAFE M7100 Managed Switches
• Persistent logging
• System Information (output of sysapiMbufDump)
•
Message Queue Debug Information
•
Memory Debug Information
•
Memory Debug Status
•
OS Information (output of osapiShowTasks)
•
/proc information (meminfo, cpuinfo, interrupts, version and net/sockstat)
debug debug-config
This command lets you use the debug-config.ini file to execute CLI commands (including devshell
and drivshell commands) for specific predefined events, and lets you upload or download the
debug-config.ini file.
For a stack configuration, the debug_config.ini file is propagated during the transfer operation to
member units of the st
ack. The file is also synchronized with any new member that joins the
stack.
The debug_config.ini file contains sections. You can place lists of commands (devshell, drivshell,
and CLI commands) within sections in the debug-config.ini file.
Format debug crashlog {[kernel] <crashlog-number> [upload <url>] | proc |
verbose | deleteall}
Mode Privileged EXEC
Default Disabled
Parameter Definition
kernel View the crash log file for the kernel.
crashlog-number Specifies the file number to view. The system maintains up to four copies, and the valid range
is 1–4.
upload url To upload the crash log to a TFTP server, use the upload k
e
yword and specify the required
TFTP server information.
proc View the application process crashlog.
verbose Enable the verbose crashlog
deleteall Delete all crash log files on the system.
Format debug debug-config {upload | download}
tftp://<ip-address>/<filepath>/<filename>
Mode Privileged EXEC