Management Commands
515
ProSAFE M7100 Managed Switches
no ip https authentication
Use this command to restore the authentication methods to the default for http server users.
ip http secure-port
Use this command to set the SSL port where port can be 1-65535 and the default is port 443.
no ip http secure-port
Use this command to reset the SSL port to the default value.
ip http secure-protocol
Use this command to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or
to both TLS1 and SSL3.
show ip http
Use this command to display the http settings for the switch.
Format no ip https authentication <method1> [<method2> ...]
Mode Global Config
Default 443
Format ip http secure-port <portid>
Mode Privileged EXEC
Format no ip http secure-port
Mode Privileged EXEC
Default SSL3 and TLS1
Format ip http secure-protocol [SSL3] [TLS1]
Mode Privileged EXEC
Format show ip http
Mode Privileged EXEC
Term Definition
HTTP Mode (Unsecure) The unsecure HTTP server administrative mode.
Java Mode The java applet administrative mode which applies to both secure and unsecure
web c
onnections.
To Next Page
Loading...
