Management Commands
565
ProSAFE M7100 Managed Switches
The following shows example CLI display output for the command.
(Switch) #show radius statistics 192.168.37.200
RADIUS Server Name............................ Default_RADIUS_Server
Server Host Address........................... 192.168.37.200
Access Requests............................... 0.00
Access Retransmissions........................ 0
Access Accepts................................ 0
Access Rejects................................ 0
Access Challenges............................. 0
Malformed Access Responses.................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
(Switch) #show radius statistics name Default_RADIUS_Server
RADIUS Server Name............................ Default_RADIUS_Server
Server Host Address........................... 192.168.37.200
Access Requests............................... 0.00
Access Retransmissions........................ 0
Access Accepts................................ 0
Access Rejects................................ 0
Access Challenges............................. 0
Malformed Access Responses.................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
TACACS+ Commands
TACACS+ provides access control for networked devices via one or more centralized servers.
Similar to RADIUS, this protocol simplifies authentication by making use of a single database that
can be shared by many clients on a large network. TACACS+ is based on the TACACS protocol
(described in RFC1492) but additionally provides for separate authentication, authorization, and
accounting services. The original protocol was UDP-based with messages passed in clear text
over the network; TACACS+ uses TCP to ensure reliable delivery and a shared key configured on
the client and daemon server to encrypt all messages.
To Next Page
Loading...
