NETGEAR ProSAFE M7100-24X - Show Dot1 X

Security Commands
300
ProSAFE M7100 Managed Switches
https : Local
dot1x :
show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending on the
tokens used.
If you do not use the optional parameters <slot/port> or <vlanid>, the command display
s
the global dot1x mode, the VLAN Assignment mode, and the Dynamic VLAN Creation mode.
If you use the optional parameter summary {<slot/port> | all}, the dot1x c
onfiguration
for the specified port or all ports are displayed.
Format show dot1x [{summary {<slot/port> | all} | detail <slot/port> |
statistics <slot/port>]
Mode Privileged EXEC
Term Definition
Administrative
Mode
Indicates whether authentication control on the switch is enabled or disabled.
VLAN Assignment
Mode
Indicates whether assignment of an authorized port to a RADIUS assigned VLAN is allowed
(enabled) or no
t (disabled).
Dynamic VL
AN
Cre
ation Mode
Indicates whether the switch can dynamically create a RADIUS-assigned VLAN if it does not
currently exist on the switch.
Monitor Mode Indicates whether the Dot1x Monitor mode on the switch is enabled or disabled.
Term Definition
Interface The interface whose configuration is displayed.
Control Mode The configured control mode for this port. Possible values are force-unauthorized |
for
ce-authorized | auto | mac-based | authorized | unauthorized.
Operating Control
Mode
The control mode under which this port is operating. Possible values are authorized |
unauthorized.
R
eauthentication
Enabled
Indicates whether re-authentication is enabled on this port.
Port Status Indicates whether the port is authorized or unauthorized. Possible values are authorized |
unauthoriz
ed.