NETGEAR ProSAFE M7100-24X - Vlan Port Pvid All; Vlan Port Tagging All

Switching Commands
53
ProSAFE M7100 Managed Switches
no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames
rec
eived with VLAN IDs that do not match the VLAN membership of the receiving interface are
admitted and forwarded to ports that are members of that VLAN.
vlan port pvid all
This command changes the VLAN ID for all interface.
no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging
is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as
untagged frames. The ID is a valid VLAN identification number.
no vlan port tagging all
This command configures the tagging behavior for all interfaces in a VLAN to disabled. If tagging
is disabled, traf
fic is transmitted as untagged frames. The ID is a valid VLAN identification
number.
Format no vlan port ingressfilter all
Mode Global Config
Default 1
Format vlan port pvid all <1-4093>
Mode Global Config
Format no vlan port pvid all
Mode Global Config
Format vlan port tagging all <1-4093>
Mode Global Config
Format no vlan port tagging all
Mode Global Config