NETGEAR ProSAFE M7100-24X - Show Ipv6 Verify Source

Security Commands
346
ProSAFE M7100 Managed Switches
The following CLI output is an example of the command output.
(Netgear Switch) #show ipv6 verify
Interface Filter Type
----------- -----------
0/1 N/A
0/2 ipv6
0/3 N/A
0/4 N/A
0/5 N/A
0/6 N/A
0/7 N/A
0/8 N/A
0/9 N/A
0/10 N/A
0/11 N/A
0/12 N/A
0/13 N/A
0/14 N/A
0/15 N/A
0/16 N/A
0/17 N/A
0/18 N/A
0/19 N/A
0/20 N/A
0/21 N/A
0/22 N/A
0/23 N/A
0/24 N/A
show ipv6 verify source
This command displays the DHCPv6 snooping filter and binding for all interfaces or for a
particular interface.
Term Definition
Interface The interface for which the filter type is displayed.
Filter Type Only IPv6 address filtering is configured on the interface.
Format show ipv6 verify source [interface <unit/slot/port>]
Mode Privileged EXEC