Routing Commands
196
ProSAFE M7100 Managed Switches
no ip irdp multicast
This command configures the address used to advertise the router to the Broadcast address
(255.255.255.155).
ip irdp holdtime
This command configures the value, in seconds, of the holdtime field of the router advertisement
sent from this interface. The holdtime range is the value of <maxadvertinterval> to 9000
seconds.
no ip irdp holdtime
This command configures the default value, in seconds, of the holdtime field of the router
adver
tisement sent from this interface.
ip irdp maxadvertinterval
This command configures the maximum time, in seconds, allowed between sending router
advertisements from the interface. The range for maxadvertinterval is 4–1800 seconds.
no ip irdp maxadvertinterval
This command configures the default maximum time, in seconds.
Format no ip irdp multicast
Mode Interface Config
Default 3 * maxinterval
Format ip irdp holdtime <maxadvertinterval-9000>
Mode Interface Config
Format no ip irdp holdtime
Mode Interface Config
Default 600
Format ip irdp maxadvertinterval <4-1800>
Mode Interface Config
Format no ip irdp maxadvertinterval
Mode Interface Config
To Next Page
Loading...
