Utility Commands
462
ProSAFE M7100 Managed Switches
no debug rip packet
This command disables tracing of RIP requests and responses.
debug sflow packet
Use this command to enable sFlow debug packet trace.
no debug sflow packet
Use this command to disable sFlow debug packet trace.
debug spanning-tree bpdu
This command enables tracing of spanning tree BPDUs received and transmitted by the switch.
no debug spanning-tree bpdu
This command disables tracing of spanning tree BPDUs.
Format no debug rip packet
Mode Privileged EXEC
Default disabled
Format debug sflow packet
Mode Privileged EXEC
Format no debug sflow packet
Mode Privileged EXEC
Default disabled
Format debug spanning-tree bpdu
Mode Privileged EXEC
Format no debug spanning-tree bpdu
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General