NETGEAR ProSAFE M7100-24X Reference Manual

Switching Commands
144
ProSAFE M7100 Managed Switches
show lldp local-device
Use this command to display summary information about the advertised LLDP local data. This
command can display summary information or detail for each interface.
show lldp local-device detail
Use this command to display detailed information about the LLDP data a specific interface
transmits.
Format show lldp local-device {<slot/port> | all}
Mode Privileged EXEC
Term Definition
Interface The interface in a slot/port format.
Port ID The port ID associated with this interface.
Port Description The port description associated with the interface.
Format show lldp local-device detail <slot/port>
Mode Privileged EXEC
Term Definition
Interface The interface that sends the LLDPDU.
Chassis ID
Subt
ype
The type of identification used in the Chassis ID field.
Chassis ID The chassis of the local device.
Port ID Subtype The type of port on the local device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the local device.
System
Description
Describes the local system by identifying the system name and versions of hardware,
oper
ating s
ystem, and networking software supported in the device.
Port Description Describes the port in an alpha-numeric format.
System
C
apabilities
Suppor
ted
Indicates the primary function(s) of the device.
System
Capabilities
Enabled
Shows which of the suppor
ted system capabilities are enabled.
Management
Addres
s
The type of address and the specific address the local LLDP agent uses to send and receive
information.

NETGEAR ProSAFE M7100-24X Specifications

General

Brand	NETGEAR
Model	ProSAFE M7100-24X
Category	Switch
Language	English